Fast Cleaning Projectiles for Powder Coat hoses - 500 Ct for 1/2" hoses

Description

These 1
/2"
plugs are used by many powder coating firms to clean powder coating supply hoses by sending up to 3 through the hose, one at a time with air pressure. Powder Coat companies have been using our Poly Plugs by Pest Boys for hose cleaners because they are cheap, fast, and an easy to use. These plugs are non abrasive hose cleaners and will not clear rust from inside pipes. Even new hoses should be cleaned with a minimum of 3 hose projectiles just prior to being installed. We also suggest that you should consider replacing hoses which are highly contaminated or aging rather than attempting to clean with several abrasive projectiles.
As an additional cost savings, we use standard USPS delivery and shipping rates.
These Plugs are over sized. We recommend you order the size which is the same as the inside diameter of your hose. The 1/2" plug is actually .562 in diameter.
POLY PLUGS are Faster, Cheaper, and Easier to use. Poly Plugs are available for  3/8, 1/2 ,9/16 and 5/8 all in 3/4" lengths and are packaged in 500 count bags also. Contact us with any questions you may have, or to see if free samples are available.
Poly Plugs are part of the Patented  “Termiticide Flex Plug System and Method”.
You can save on shipping if you order multiple bags. Additional bag shipping drops to .00 per bag