Ram Clutches 910400 Street Stock Clutch, 86-Up GM 10.5 X 1-1/8-26

Description

RAM Clutches for ‘stock clutch rule’ classes give you unmatched performance and durability. Our 10.5 inch diameter assembly utilizes a billet aluminum pressure ring with a riveted steel heat shield that provides a durable mating surface for the clutch disc. A 3000 lb. pressure spring provides increased static pressure over stock clutches. Used in conjunction with a RAM six paddle solid hub disc, this combination weighs in at just over 15 pounds. If your rules require a full facing or sprung hub disc, the RAM 300 Series organic racing disc provides the best holding power of any organic disc available and adds only about 2 pounds to the total weight of the set. RAM offers a lightweight 17 pound billet steel flywheel for Chevrolet that matches the above components
Ram Clutches 910400 Street Stock Clutch, 86-Up GM 10.5 X 1-1/8-26
Sku # 605910400
Mfr. Part # 910400
Condition
New
Brand
Ram Clutches
Sold
Set
Details
Info
RAM Clutches for ‘stock clutch rule’ classes give you unmatched performance and durability. Our 10.5 inch diameter assembly utilizes a billet aluminum pressure ring with a riveted steel heat shield that provides a durable mating surface for the clutch disc. A 3000 lb. pressure spring provides increased static pressure over stock clutches. Used in conjunction with a RAM six paddle solid hub disc, this combination weighs in at just over 15 pounds. If your rules require a full facing or sprung hub disc, the RAM 300 Series organic racing disc provides the best holding power of any organic disc available and adds only about 2 pounds to the total weight of the set. RAM offers a lightweight 17 pound billet steel flywheel for Chevrolet that matches the above components. If you are required to use all steel components, RAM offers a similar 10.5 inch pressure plate with a nodular iron pressure ring. This unit uses the same heavier pressure spring for increased holding power. All RAM street stock clutches are completely rebuildable by the factory.
EXCELLENT CHOICE FOR ROAD RACING AND AUTOCROSS APPLICATIONS!
This is a Complete Lightweight System for 10.5" 1986-Up GM 1-1/8"-26 spline. Features all steel construction, requires the 530 bolt set.
WARNING: Cancer and Reproductive Harm -- p65Warnings.ca.gov
This item is being shipped to you directly from the manufacturer and is subject to an increased handling time. Delivery estimates that include the handling time are displayed on the "Shipping and Payments" tab.
This item is being shipped to you directly from the manufacturer and is subject to an increased handling time. Delivery estimates that include the handling time are displayed on the "Shipping and Payments" tab.
Specs
Sold in Quantity
Kit
Hub Style
Solid
Rear Main Seal Style
1-piece
Friction Material
Organic
Engine Balance
External
Hardware Included
Yes
Input Shaft Diameter
1.125
Pressure Plate Style
Diaphragm
Pilot Bushing Included
No
Counterweight Assist
No
Throwout Bearing Included
No
Flywheel Included
Yes
Flywheel Material
Billet steel
Input Spline Quantity
26
Alignment Tool Included
No
Clutch Diameter
10.5"
Disc Style
Full face
Notes
Requires 530 flywheel bolt set
Tooth Count
153-tooth
GTIN Code
809009346504
MFG. Part #
910400
Shipping
Combined Shipping:
Please take advantage of the “add to cart” button on each listing to get everything in your cart prior to completing checkout. This will ensure you receive a combined shipping rate on your entire order.
Freight Shipping:
Some products are too large for standard ground delivery and must be shipped via truck freight.
Please contact us via eBay Message for a freight shipping estimate.
When possible, please provide a business or commercial address for delivery to eliminate additional fees.
Please ensure the phone number provided is accurate to avoid delays.
Upon delivery, the recipient must inspect the shipment before the driver leaves as there may be concealed damage; please open the carton to inspect the contents. Any visual damage must be noted on the shipping document BEFORE signing for delivery. Any damage not noted before signing for delivery is the buyer’s responsibility. If damage is found, the shipment may be refused, but please contact us as soon as possible and arrangements will be made to have the product replaced and damaged parts returned.
Tech Support
We're here to help before and after your purchase. If you have a question or need assistance with one of our products, please contact us through eBay Messaging and a knowledgeable Speedway Motors team member will be happy to help.
About
Speedway Motors is America’s Oldest Speed Shop® and has been a trusted source for specialty rodding and racing products and friendly expert advice for more than 69 years. Founded in 1952 by “Speedy” Bill Smith – a racer and street rodder himself – Speedway has grown from a one-man operation to become the world’s largest manufacturer, distributor and retailer of street rod and racing products. Our industry-leading fast delivery is the result of same-day shipping from our state-of-the-art, centrally located 500,000 sq. ft. headquarters. Speedway’s size offers customers unmatched product selection and low pricing, while our excellent technical support and customer service have made us a recognized leader in the rodding and racing industries.
Return Policy
We want you to be satisfied with your purchase. If within 60 days after you receive your shipment and you are not satisfied, you may return the item for a refund. Refunds will be processed (1-2) days after the item is received by Speedway. All returned merchandise must be in original factory condition with no modifications or alterations. A restocking fee up to 15% may be applied if items are not in new condition.
Returned merchandise must include all packaging materials, warranty cards, manuals, and accessories. If the items being returned need to be repackaged, there will be a repacking charge. Repack the item in a sturdy box, include a copy of your invoice and complete the form on the back of the invoice. You must ship orders back PREPAID. WE DO NOT ACCEPT COD SHIPMENTS.
All fiberglass items returned will be subject to a 15% restocking charge. No returns on electrical parts, DVDs, and books unless they are defective. Absolutely no returns on special order or closeout merchandise.
Payment
Accepted Payment Methods - PayPal and major credit cards are accepted.
Terms - Immediate payment is required on all listings.
To view states in which sales tax will apply to your order, please visit the “shipping and payments” tab.
Guarantee
Speedway accepts full responsibility for the accuracy of our listings and product representation. If an egregious shipping or description error occurs, we are happy to assist with a replacement or refund.
Disclaimer
Due to our large inventory and the diversity of our product line, the stock photo used may not be an exact representation of the item you are bidding on. Please read all product information carefully before purchase to avoid any order issues.